Aws A5.14 Nickel Alloy Ernicu-7 MIG Welding Wire TIG Welding Rod for Monel 400 Welding
1. FM60 Oxford Alloy 60 ERNiCu-7 TIG welding rod
ERNiCu-7 has good strength and resists corrosion in many media, including seawater, salts, and reducing acids. And it can be used to overlay over carbon steel, provided a buffer layer of ERNi-1 is used for the first layer. This alloy is not age hardnable and when used to join Monel K-500 has lower strength than the base metal.
Common Names: Oxford Alloy® 60 FM 60 Techalloy 418
Standard: AWS 5.14 Class ERNiCu-7 / ASME SFA 5.14 Class ERNiCu-7 ASME II, SFA-5.14 UNS N04060 Werkstoff Nr. 2.4377 ISO SNi4060 Europe NiCu30Mn3Ti
CHEMICAL COMPOSITION(%)
| C | Si | Mn | S | P | Ni |
| ≤0.15 | ≤1.25 | ≤4.0 | ≤0.015 | ≤0.02 | 62-69 |
| Al | Ti | Fe | Cu | others | |
| ≤1.25 | 1.5-3.0 | ≤2.5 | Rest | <0.5 |
WELDING PARAMETERS
| Process | Diameter | Voltage | Amperage | Gas |
| TIG | .035″ (0.9mm) .045″ (1.2mm) 1/16″ (1.6mm) 3/32″ (2.4mm) 1/8″ (3.2mm) |
12-15 13-16 14-18 15-20 15-20 | 60-90 80-110 90-130 120-175 150-220 |
100% Argon 100% Argon 100% Argon 100% Argon 100% Argon |
| MIG | .035″ (0.9mm) .045″ (1.2mm) 1/16″ (1.6mm) |
26-29 28-32 29-33 | 150-190 180-220 200-250 |
75% Argon+25%Helium 75% Argon+25%Helium 75% Argon + 25% Helium |
| SAW | 3/32″ (2.4mm) 1/8″ (3.2mm) 5/32″ (4.0mm) | 28-30 29-32 30-33 | 275-350 350-450 400-550 | Suitable Flux may be used Suitable Flux may be used Suitable Flux may be used |
MECHANICAL PROPERTIES
| Tensile Strength | 76,5000 PSI | 530 MPA |
| Yield Strength | 52,500 PSI | 360 MPA |
| Elongation | 34% |
APPLICATIONS
ERNiCu-7 can be used for dissimilar welding applications using various nickel-copper alloys to nickel 200 and to copper-nickel alloys.
ERNiCu-7 is used for gas-tungsten-arc, gas-metal-arc, and submerged-arc welding of Monel alloy 400 and K-500.
ERNiCu-7 is widely used in marine applications because of its good resistance to the corrosive effects of seawater and brackish waters.
