China Chinese wholesale Magnetically Actuated Parts - Pure nickel resistance wire – TANKII Manufacture and Factory

Chinese wholesale Magnetically Actuated Parts - Pure nickel resistance wire – TANKII

Short Description:

Copper Nickel Alloy is mainly made of copper and nickel. The copper and nickel can be melted together no matter what percentage. Normally the resistivity of CuNi alloy will be higher if the Nickel content is larger than Copper content. From CuNi1 to CuNi44, the resistivity is from 0.03μΩm to 0.49μΩm. That will help the resistor manufacture choosing the most suitable alloy wire.

Resistivity: 0.40+/-5%μΩ.m

shape: round wire

Diameter: 0.05-5.0mm

Application: resistor, heating, heater

Sample: Accepted small order

condition: soft

surface: Bright

Packing: spool+ carton+wooden case

Send email to us

Product Detail

FAQ

Product Tags

Feedback (2)

we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for Hardening And Any Controlled Atmosphere Applications , Single Strand Coils , Alloy 380 , We have been searching ahead to even better cooperation with overseas buyers dependant on mutual benefits. Be sure to really feel totally free to speak to us for additional element!

Chinese wholesale Magnetically Actuated Parts - Pure nickel resistance wire – TANKII Detail:

Pure nickel resistance wire

Pure nickel wire has the characteristics of good strength at high temperature, good plasticity, poor thermal conductivity and high resistivity.

Application areas

Wire: Sputter Targets, evaporation pellets, regulator coil in glow plugs of diesel engines; litz wire for current conduction under elevated temperatures and in aggressive environments, Pre material for thin wire manfacturing, Ni wire mesh, Thermal Spraying, Coating layer for corrosion protection from alkalis; salt spray; molten salt and reduciing chemicals; coating layer for high temperature resistance; corrosion protection at high temperatures; coating layer for membrane walls of power plants

Processing history

For producing wire, the 6 mm hot rolled thick plates are cut into 6 mm wide sticks. The sticks are frontally welded. Afterwards the raw wire can be treated in the same way as hot rolled wire produced by melt metallurgy. accordingly, the wire is drawn to the desired dimensions through cold drawing and intermediate annealing.

Surface Finish

Blank/Bare/bright surface

Pure nickel resistance wire
Grade	Ni200, Ni201, Ni205
Size	wire：φ0.1-12mm
Features	Good mechanical strength, corrosion resistance and high heat resistance strength. It is suitable for making vacuum devices, electronic instrument components, and filters for chemical production of strong alkalis.
Application	radio, electric light source, machinery manufacturing, chemical industry, and is an important structural material in vacuum electronic devices.

Chemical Composition (Wt.%)

Nickel Grade	Ni+Co	Cu	Si	Mn	C	Cr	S	Fe	Mg
Nickel Grade	≥	≤
Ni201	99.2	.25	.3	.35	.02	.2	.01	.3	-
Ni200	99.0	.25	.3	.35	.15	.2	.01	.3	-

Mechanical Properties

Grade	Condition	Diameter(mm)	Tensile Strength N/mm2, Min	Elongation, %,Min
Ni200	M	0.03-0.20	373	15
		0.21-0.48	343	20
		0.50-1.00	314	20
		1.05-6.00	294	25
	1/2Y	0.10-0.50	686-883	-
		0.53-1.00	588-785	-
		1.05-5.00	490-637	-
	Y	0.03-0.09	785-1275	-
		0.10-0.50	735-981	-
		0.53-1.00	686-883	-
		1.05-6.00	539-834	-
Ni201	M	0.03-0.20	422	15
		0.21-0.48	392	20
		0.50-1.00	373	20
		1.05-6.00	343	25
	1/2Y	0.10-0.50	785-981	-
		0.53-1.00	686-834	-
		1.05-5.00	539-686	-
	Y	0.03-0.09	883-1325	-
		0.10-0.50	834-1079	-
		0.53-1.00	735-981	-
		1.05-6.00	637-883	-

Dimension and Tolerance (mm)

Diameter	0.025-0.03	>0.03-0.10	>0.10-0.40	>0.40-0.80	>0.80-1.20	>1.20-2.00
Tolerance	±0.0025	±0.005	±0.006	±0.013	±0.02	±0.03

Remarks:

1). Condition: M=Soft.1/2Y=1/2Hard, Y= Hard

2). If you have resistivity demand, also we melt for you.

Product detail pictures:

Related Product Guide:

We thinks what prospects think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater high-quality, reduced processing costs, rates are much more reasonable, won the new and previous consumers the support and affirmation for Chinese wholesale Magnetically Actuated Parts - Pure nickel resistance wire – TANKII , The product will supply to all over the world, such as: Austria, Curacao, Peru, When It produced, it making use of the world's major method for reliable operation, a low failure price, it appropriate for Jeddah shoppers choice. Our enterprise. s situated inside the national civilized cities, the website traffic is very hassle-free, unique geographical and financial circumstances. We pursue a "people-oriented, meticulous manufacturing, brainstorm, make brilliant" company philosophy. Strict good quality management, fantastic service, affordable cost in Jeddah is our stand around the premise of competitors. If needed, welcome to make contact with us by our web page or phone consultation, we'll be delighted to serve you.