Welcome to our websites!

CuNi Alloy CuNi2 Resistance Heating Wire for Car Seat Heating

Short Description:

As a big manufacturer and exporter in China on the line of electric resistance alloy, we can supply all kinds of electric resistance alloy wire and strips (resistance steel wire and strips),
Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44
General Description
Due to has high tensile strength and increased resistivity values, copper nickel alloy wires are the first choice for applications as resistance wires. With the different nickel amount in this product range, the characteristics of the wire can be chosen according to your requirements. Copper nickel alloy wires are available as bare wire, or enamelled wire with any insulation and self-bonding enamel. Furthermore, litz wire made of enamelled copper nickel alloy wire are available.


  • Certificate: ISO 9001
  • Size: Customized
  • Type : wire
  • Material : copper nickel
  • package : spool. wooden Case
  • standard: RoHS, ISO 9001: 2008
  • trade mark : Tankii
  • sample : free
  • port : China
  • surface : bright surface
  • Resistivity: 0.05+/-5%
  • Product Detail

    FAQ

    Product Tags

    Features
    1. Higher resistance than copper
    2. High tensile strength
    3. Good bending proof performance

    Appication:
    Low-voltage circuit breaker, thermal overload relay, electrical heating cable, electrical heating mats, snow melting cable and mats, ceiling radiant heating mats, Floor heating mats & Cables, Freeze protection cables, electrical heat tracers, PTFE heating cables, hose heaters, and other low-voltage electrical product

    Chemical Content, %

    Ni Mn Fe Si Cu Other ROHS Directive
    Cd Pb Hg Cr
    2 - - - Bal - ND ND ND ND

    Mechanical Properties

    Max Continuous Service Temp 200ºC
    Resisivity at 20ºC 0.05±5%ohm mm2/m
    Density 8.9 g/cm3
    Thermal Conductivity <120
    Melting Point 1090ºC
    Tensile Strength,N/mm2   Annealed,Soft 200~310 Mpa
    Tensile Strength,N/mm2   Cold Rolled 280~620 Mpa
    Elongation(anneal) 25%(min)
    Elongation(cold rolled) 2%(min)
    EMF vs Cu, μV/ºC (0~100ºC) -12
    Micrographic Structure austenite
    Magnetic Property Non

    Application of CuNi2
    CuNi2 low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.


  • Previous:
  • Next:

  • Write your message here and send it to us