Welcome to our websites!
Electric Thread Screw Cartridge Heater Rod Heating Element
*Tube Material:Seamless SS304, SS321, SS316L, SS310S, Incoloy 400/600/800/840 etc;
*MGO Rod: Imported from Japan Tateho, USA OTC;
*MGO Powder: Imported from UK UCM, Japan Tateho;
* Resistance Heating Wire: Sweden Kanthal, Germany BGH, NiCr8020;
*High Temperature Wire: Fiberglass wire, Pure Nickel Core wire, Telfon wire, Silicone wire;
*Terminal Pin: Nickel-manganese alloy, pure nickel wire.
Under normal conditions consistent with the design range,
A grades cartridge heater warranty :365days
B grades cartridge heater warranty:180days
| Voltage & Power | 3.7V 4.5V 5V 12V 24V 48V 110V 220V 380V 420V 600V. Customized |
| Max.Working temperature | 927degree Celsius |
| Pipe diameter | 1-35mm. Can be customized |
| Sheath material | Stainless steel304/316/321/310S/incoloy 600/800/825/840, copper,etc. |
| Features | long service life |
| Insulation material | High-purity magnesium oxide powder |
| Unheated zone | 5-10mm |
| Heat intensity | Not exceeding 30w/cm2 (advisable) |
| Power | Depends on the dimension |
| Exhaust extreme (when cold) | <=0.1mA to 242 v. |
| Insulation (when cold) | 5 Min Ohms 500 Watts minimum |
| Dielectric strength | 1500v. 1/sec |
| Working temperature | 750 Deg C max. |
| Length tolerance | +/-1.5% |
| Diameter tolerance | -0.02 to -0.06 mm |
| Cut off connection tolerance | +/-15 mm |
| Power tolerance (w) | +5 % – 10 % |
| Cold areas | Depends on length and diameter 5-25mm |
Write your message here and send it to us
